home >> Lifting Electromagnet >> Lifting Electromagnet Model Series MW03 for Handling Plate Blanks

Set font Size:Large Small

Lifting Electromagnet Model Series MW03 for Handling Plate Blanks

Lifting Electromagnet for Handling Plate Blanks
overall dimension sketch

Applications:

Applied to lifting and transferring huge steel ingots, continuous casting plate blanks and heavy steel plates. Please use two lifting electromagnets to operate on the plate banks at the length of exceeding 6 meters in order to avoid the material tilting caused by off-center. It is high temperature type lifting electromagnet adopting unique method of heat-protection. Temperature limit of the attached items is increased from 600 degree to 700 degree, which expands the application range. Various structures and technical datas are available based on the attached items under different conditions to satisfy the wide demands from the clients.

Main technical datasDC-220V,TD-60%
Model (100℃) Normal temperature type(l00V) High temperature type(600℃)
MW03-70L MW03-90L MW03-110L MW03-120L MW03-140L MW03-160L MW03-180L MW03-70L/G MW03-90L/G MW03-110L/G MW03-120L/G MW03-140L/G MW03-160L/G MW03-180L/G
overall dimension (mm) A 700 900 1100 1200 1400 1600 1800 700 900 1100 1200 1400 1600 1800
B 950 920 1080 1290 1100 1663 1910 990 1050 1140 1360 1175 1720 2000
C 180 160 250 250 280 500 500 180 160 250 250 280 500 500
D 110 125 170 170 220 220 230 110 125 150 170 200 220 230
E 32 50 65 85 90 90 115 32 50 65 85 90 90 115
Mass (kg) 540 842 1590 1984 2726 3774 5000 640 987 1600 2100 3410 4400 5800
current (A) 15 21 23 29 37 55 8012.3 15.3 19.8 30 32.8 39 53
power (kw) 3.3 4.6 5.0 6.4 8.2 12.0 17.5 2.7 3.4 4.4 6.5 7.9 8.6 11.7
(t)
Lifting capacity of one unit
6 10 15 18 25 32 40 6 10 15 18 25 32 40